Empulse Group a collection of notes from a sys admin, musician, and father

7Nov/100

HP Array Configuration Utility CLI for Linux

So today at work I needed to place a stand-alone drive in a RAID 0. This was on an HP DL385 so I had the hpacucli RAID utility available.

[root@www ~]# hpacucli
=>  ctrl all show config
Smart Array P400 in Slot 1           (sn: P61620F9VV90K4)
array A (SAS, Unused Space: 0 MB)
logicaldrive 1 (68.3 GB, RAID 1, OK)
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 72 GB, OK)
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 72 GB, OK)
unassigned
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 72 GB, OK)

Smart Array P400 in Slot 1           (sn: P61620F9VV90K4)
array A (SAS, Unused Space: 0 MB)
logicaldrive 1 (68.3 GB, RAID 1, OK)
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 72 GB, OK)      physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 72 GB, OK)

unassigned
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 72 GB, OK)

=>  ctrl slot=1 create type=ld drives=2I:1:4 raid=0

=> ctrl slot=1 ld all show status
logicaldrive 1 (68.3 GB, RAID 1): OK
logicaldrive 2 (68.3 GB, RAID 0): OK

http://www.datadisk.co.uk/html_docs/redhat/hpacucli.htm

Filed under: Linux Leave a comment
Comments (0) Trackbacks (0)

No comments yet.


Leave a comment

No trackbacks yet.